Return to Products page

LOADMASTER

RV20

Designed to move bumper hitch campers and boat trailers. The ball size and height are both adjustable. (2) 12V deep
cycle batteries power the RV-20. An automatic battery charger is also built in. The 3HP, 24V motor is mounted on a
transaxle which has an automotive style differential. The drive wheels are 16-6.50 x 8 load range C radials with a
lug tread. The steering wheel is a 10" x 2" heavy-duty caster wheel for use on hard surfaces.
RV20

RV30

Designed to move Fifth wheel, Gooseneck and Ball Hitch Trailers. The 3HP, 24Volt motor is mounted on a transaxle,
which has an automotive style differential. The drive wheels are 16-6.50 x 8 load range C radials with a lug tread.
The steering wheel a 10" x 2" heavy-duty caster wheel for use on hard surfaces. A ball hitch and/or 5th wheel hitch
can be mounted in a fixed position or on the optional hydraulic lift-plate. The hydraulic lift controls are mounted
on the handlebar for easy use while moving the trailer. A trailer plug receptacle and trailer brake controller is
optional. The brake controller is powered by an auxiliary battery with charger, and comes with a switch to lock
the trailer brakes when parking.
RV30

RV50

Designed to move Fifth wheel, Gooseneck and Ball Hitch Trailers. The 3HP, 24Volt motor is mounted on a transaxle,
which has an automotive style differential. The drive wheels are 16-6.50 x 8 load range C radials with a lug tread.
The RV-50 is equipped with a steerable dual 4.10-3.50 x 4 tires for use on gravel or other hard-packed ground. A
ball hitch and/or 5th wheel hitch can be mounted in a fixed position or on the optional hydraulic lift-plate. The
hydraulic lift controls are mounted on the handlebar for easy use while moving the trailer. A trailer plug receptacle
and trailer brake controller is optional. The brake controller is powered by an auxiliary battery with charger, and
comes with a switch to lock the trailer brakes when parking.
RV50

RV70

Our largest RV Tug. The same great features of the RV50 but 10-1/2" longer and 6" wider for even greater stability.
Heavier construction for the really big trailers. Designed to move Fifth wheel, Gooseneck and Ball Hitch Trailers.
The 3HP, 24Volt motor (or optional 4-1/2 hp. 36 volt motor) is matched with a 2 speed transaxle, which has an
automotive style differential. The drive wheels are 6.50-16 load range C with a lug tread.
The RV-70 is equipped with steerable dual 5.30 x 13" pneumatic tires for use on all types of surfaces.
A ball hitch and/or 5th wheel hitch can be mounted in a fixed position or on the optional hydraulic
lift-plate. The hydraulic lift controls are mounted on the handlebar for easy use while moving the trailer.
A trailer plug receptacle and trailer brake controller is optional. The brake controller is powered by an
auxiliary battery with charger, and allows for operation of the trailer brakes from the handle bar of the tug.
This also allows you to operate lights and slide-outs from the tug power.
RV70




If you have any comments or questions about this site contact our webmaster

© 2007 The Fab Shop, L.L.C. All rights reserved.